當前位置:主頁 > 常見問題 >

橡膠接頭安裝在減震水泵出口有什么作用

作者:上海松夏減震器有限公司 日期:2019-01-24 來源:橡膠接頭廠家
   消防管網泵房機組管道連接、污水處理管道連接、高壓氣液化學介質輸送、石油、船舶等。是世界上最常用的管件一種橡膠接頭。管道噪音小,密封性好,重量輕,安裝維護方便,使用壽命長。
   Fire fighting pipe network, pump room, sewage treatment pipe, high pressure gas liquefaction medium transportation, oil, ship, etc.Is the world's most commonly used pipe a rubber joint.Low noise, good sealing, light weight, easy installation and maintenance, long service life.
橡膠接頭
   其特點有:
   Its features are:
   1、體積小,重量輕。
   1. Small size and light weight.
   2、還存在一些橫向位移、軸向位移和角位移
   2.There are also some transverse, axial and angular displacements
   3、橡膠接頭能降低振動和噪音。水泵出口安裝橡膠接頭的作用是減少沖擊,二是滿足熱膨脹和冷收縮的需要,三是便于閥門的拆卸、裝配和維護,
   3, rubber joint can reduce vibration and noise.The rubber connector installed at the pump outlet can reduce impact, meet the needs of thermal expansion and cold contraction, and facilitate the disassembly, assembly and maintenance of the valve.
90度接頭
   安裝順序應為:
   Installation sequence shall be:
   橡膠軟連接、止回閥、閘閥。壓力表最好安裝在泵出口處,但一定要在止回閥前面。
   Rubber soft connection, check valve, gate valve.Pressure gauges are best installed at the pump outlet, but always in front of the check valve.
菱形橡膠接頭

橡膠接頭產品分類

  • 單球體橡膠接頭

  • 雙球體橡膠接頭

  • 同心異徑橡膠接頭

  • 偏心異徑橡膠接頭

  • 卡箍橡膠接頭

  • 螺紋絲扣橡膠接頭

  • 90度橡膠彎頭

  • 菱形法蘭橡膠接頭

  • 橡膠鴨嘴止回閥

  • ?