當前位置:主頁 > 使用說明 >

耐負壓橡膠接頭制作要求以及性能特點

作者:上海松夏減震器有限公司 日期:2019-03-07 來源:橡膠接頭廠家
   耐負壓橡膠軟接頭要求很高,單純的橡膠是耐不行負壓的,比方方說管道內徑是0.1kg的負壓,橡膠管體就會吸扁,跟管道向外的壓力是絕對不同的,所以,負壓內徑必須增加負壓導流筒,簡單的說,負壓導流筒就是在橡膠接頭的內徑增加一個碳鋼的管子,但是接頭的內徑要比原來的內徑小了,有了負壓導流筒,橡膠接頭就不會被吸扁,這樣橡膠接頭原來的隔振、伸縮效果也不會影響,一受到影響的就是接頭的內徑稍稍變小。
  
Resistance to negative pressure high requirement of soft rubber joints, pure rubber is not negative pressure resistance, said fang fang, pipe diameter is 0.1 kg of negative pressure, the rubber hose body will absorb flat, it is absolutely different with that of the outward, so the negative pressure inside diameter must be increased negative pressure diversion cone, in short, the negative pressure diversion tube is in the inner diameter of the rubber joint increase a carbon steel pipe, but the inner diameter of the joint is smaller than the inner diameter of the original, with negative pressure diversion tube, rubber joint will not be flat, so that the rubber joint vibration isolation, expansion effect will not affect the original and the affected is the inner diameter of the joint is slightly smaller.
耐負壓橡膠接頭制作要求以及性能特點
  耐負壓橡膠接頭具有耐負壓、彈性好、位移量大、平衡管道偏差、吸收振蕩、下降噪音效果好、安裝方便,還可以大大下降管道系統的震動和噪聲,可從根本上解決各類管路的接口位移,軸向伸縮及不齊心度等問題,主要運用在抽水機出進口和電子管道以及尾礦管道中,在結構上同一樣的橡膠接頭產品有非常大的區別,相比于一樣的橡膠接頭,具有增壓盡量照顧裝置,擔保橡膠接頭在受到負壓時不會吸扁,增壓圈一樣為鋼制或者不銹鋼。

  Negative pressure resistant rubber joint negative pressure resistance, good elasticity, large displacement, balance pipe deviation, absorption oscillation, decrease the noise effect is good, easy installation, can be dramatically reduced vibration and noise of pipeline system, can fundamentally solve all kinds of pipeline interface displacement, axial expansion, and the problem of work is mainly used in the pump inlet and electronic pipelines and tailings in the pipeline, in structure with the same rubber joint products have very big difference, as compared to the rubber joint, with pressure as far as possible to take care of the device, rubber joint guarantee under the negative pressure will not absorb flat, pressurization circle for steel or stainless steel.

耐負壓橡膠接頭性能特點

橡膠接頭產品分類

  • 單球體橡膠接頭

  • 雙球體橡膠接頭

  • 同心異徑橡膠接頭

  • 偏心異徑橡膠接頭

  • 卡箍橡膠接頭

  • 螺紋絲扣橡膠接頭

  • 90度橡膠彎頭

  • 菱形法蘭橡膠接頭

  • 橡膠鴨嘴止回閥

  • ?